Reception and distribution devices SZNRO FSS,USN,PRU,CS,ROM, etc.

• The combined drain filter, FSS serves for the possibility of connecting the pressure-suction hose of a tanker truck.
• DOCUMENTATION
  • FSS. Technical specifications.
• The installation of the lower drain, USN is used for the lower discharge of oil and petroleum products from railway tank cars.
• DOCUMENTATION
  • USN. Technical specifications.
• The receiving and distributing device, PRU "EkonTrans" helps to ensure the intake of petroleum products into the tank and their intake to the minimum permitted level in the tank.
• DOCUMENTATION
  • PRU. Technical specifications.
  • The questionnaire.
• The siphon crane, KS "Kaexa" is necessary for draining the water formed under the goods from containers and tanks in which gasoline and other petroleum products are stored.
• DOCUMENTATION
  • CS. Technical specifications.
  • The questionnaire.
• Floating intake device, ROM is used to collect high-quality fuel and oils from the upper layer of the tank, which allows you to exclude water and other impurities in the product.
• DOCUMENTATION
  • The questionnaire.
• The combined receiving and distributing device, SUPR makes it possible to increase the rate of discharge and filling to the maximum, which does not affect the safety, reliability and cost of operation of the tank.
• DOCUMENTATION
  • SUPR. Technical specifications.
  • The questionnaire.
• The device of uniform feeding, URP allows to separate into fractions in a short period of time due to the uniform supply of multiphase oil product in the form of an emulsion.
• DOCUMENTATION
  • URP. Technical specifications.
• The float shut-off valve, KZP is needed to reduce water leakage, due to the automatic closure of the supply pipelines and the closure of tanks.
• DOCUMENTATION
  • KZP. Technical specifications.
  • The questionnaire.
• The manual piston pump covers any liquid substances and anti-water-crystallization liquids. The pump is adapted for use in tanks with jet fuel, as a component sampling device.
• DOCUMENTATION
  • NRP. Technical specifications.
• The upper control mechanism, the MUV "Garant" is necessary for the trouble-free opening and closing of the lid of the cracker and the bottom valve and fixing them in the open position.
• DOCUMENTATION
  • MUV . Technical specifications.
  • The questionnaire.
• The drain coupling, MS "Slinor" is necessary to ensure the tightness of the connection of the tanker hose and the tank drain devices.
• DOCUMENTATION
  • MS. Technical specifications.
• A firecracker, HP "Trap" is necessary to control the spillage of petroleum products from containers in case of a gust.
• DOCUMENTATION
  • HP. Technical specifications.
  • The questionnaire.
• BR, LR, PCS, TP - a set of equipment for the intake of petroleum products from above from tanks, consists of a roller block, a manual winch, a pipe joint, a lifting pipe and a main and spare.
• DOCUMENTATION
  • BR, LR, PCS, etc. Technical characteristics.
• The control mechanism of the flapper side, MU-1, MU-2 "Ant" is used at oil depots and gas stations for petroleum products, is necessary for opening and closing the flapper covers, controls both the main cover and the bypass. When the lids are open, this mechanism locks them in an upright position.
• DOCUMENTATION
  • MU-1, MU-2. Technical specifications.
  • The questionnaire.

Catalog